BUILD YOUR LASER SYSTEM . . .

from the ground up!

Laserod Model M1 System

Start with the feet.

Casters as feet The four casters are roll and set, meaning they lock and thus will not roll.  A lift mechanism takes the weight off the rollers when not in use, so you get the double advantage of fixed feet and movable wheels. These feet are not vibration isolated.

Next the frame . . . the skeleton of the laser workstation  

M1 System Frame Ideal skeleton upon which to flesh out a laser system!

Portable and Compact

The Laserod Model M1 Frame features compactness to minimize footprint.  An electronics cabinet for 19" rack mounted components goes under the laser head in the spaces marked "Electronics & Computer" above.  Elimination of a separate electronics cabinet module improves portability and compactness.  Rack mounted computer, stage driver electronics, and some laser power supplies can also fit under the laser head. Larger laser power supplies go on the floor under the table. The frame is fork liftable but it usually rolls around on its castor feet.. 

The M1 System without laser safety covers. (click on photo for a larger view)

Specifications

The following specifications apply to the M1 Frame:

• Construction:  welded steel frame & laser support.  3" sturdy legs.
• Table Top:  36" H, 33" W, 56" D
• Electronics Cabinet Dimensions (ID): 16.5" H, 25" W, 19.5" D
• Space for Laser Power Supply (ID): 32" H, 25"W, 40"D
• Length of Laser Head Support:  42"